Venice Handle Sets – OEM Replacement Lever Hardware
0 subcategories — 13 SKUs
Venice handle sets deliver keyed and dummy lever configurations for hinged door installations. Stock 13 SKUs covering active keyed-above, keyed-below, and fixed dummy levers for residential and light commercial applications.
Venice Handle Set Configurations and Compatibility
Venice handle sets mount on standard backplates and integrate with mortise or tubular latch mechanisms. Keyed variants control single-cylinder or multi-point locking systems; dummy fixed levers pair with separate deadbolts or multipoint hardware. Proper handle selection depends on latch type, door thickness, and lock cylinder location—critical during new construction and full-frame replacement scenarios.
Identify Your Venice Lever Configuration
Venice handle sets come in keyed-above-handle, keyed-below-handle, and dummy fixed-lever styles. Measure backplate cutout diameter and door edge thickness; verify latch type (mortise vs. tubular) before ordering. Keyed variants accept standard US cylinders; dummy levers require separate deadbolt or multipoint lock hardware on the active side.
Specification and Sizing Guidance
Venice sets fit standard 2-3/8" and 2-3/4" backset doors. Confirm cylinder keying (6-pin standard), lever length (typically 3.5–4.5 inches), and finish (stainless, brass, satin). Cross-reference your existing latch bore and strike location before installation to avoid costly rework.
Trade Volume and Technical Support
Stock 13 SKUs for bulk contractor and dealer orders. Venice handle sets support retrofit installations and new construction kits. Cross-compatibility with common mortise latches and euro-cylinder systems simplifies field repairs and reduces lead times on door hardware replacement projects.