Key-Operated No-Lever Locks & Hardware
0 subcategories — 82 SKUs
Key-operated no-lever locks provide secure multipoint locking on hinged doors without lever handles. Stock 82 SKUs of GU Ferco and HOPPE key-operated hardware for retrofit and new installations across commercial and residential door applications.
OEM Replacement Key-Operated Multipoint Lock Systems
Key-operated no-lever configurations lock and unlock from the outside cylinder only—no interior lever operation. Commonly specified for commercial, institutional, and security-focused applications. Identifying the correct system requires matching cylinder type, backset, and multipoint locking mechanism (shootbolt, roller, tongue). GU Ferco and HOPPE systems dominate this segment.
Exact OEM Fit & Multipoint Mechanism Match
Key-operated no-lever locks replace failed systems or retrofit existing door frames. Verify cylinder type (euro or american), backset measurement, and locking mechanism (shootbolt/roller/tongue) against the original hardware. Frame preparation and strike alignment critical for proper multipoint engagement. Cross-reference door frame brand and model before ordering.
Specification Guidance: Cylinder Type & Backset Sizing
Most European systems use 92mm (3-5/8") backset with euro cylinders; American systems vary 2-3/8" to 2-3/4". Measure cylinder center-to-edge and lock body depth. Key-operated no-lever hardware requires precise alignment—mismatched backset prevents bolt travel. Consult door manufacturer specs or original hardware data before selection.
Trade Volume & Technical Support for Installers
All About Doors stocks bulk inventory for contractor and dealer accounts. GU Ferco and HOPPE key-operated systems support high-volume commercial retrofits and new-construction door kits. Technical spec sheets and installation guides available for each SKU to support field troubleshooting and proper frame prep.