16mm Manual 60/92 Gear, Shootbolt-Tongue @ 24.41", 1" Deadbolt Throw

Hoppe 16mm Manual Tongue-Shootbolt Bottom Gear - 60/92 PZ, 1" Deadbolt

Lower section of the Hoppe HLS9000 three-piece multipoint lock assembly with manual operation. This bottom gear houses the tongue and shootbolt mechanism with a 1 inch (25.4mm) deadbolt throw. The 60mm backset and 60/92mm PZ spacing are standard specifications for this configuration and intended for active door installation.

The 16mm faceplate width is consistent across Hoppe tongue-and-shootbolt multipoint systems. This represents the bottom third of the complete lock assembly. Verify backset, PZ spacing, deadbolt throw depth, and door thickness against your existing hardware before ordering.

Technical Information

• Product Type: Multipoint lock bottom gear assembly with tongue and shootbolt
• Faceplate Width: 5/8 inch (16mm)
• Backset: 2-3/8 inches (60mm)
• PZ Spacing: 60/92mm
• Deadbolt Throw: 1 inch (25.4mm)
• Operation: Manual (key-operated)
• System: Hoppe HLS9000 multipoint lock; active door

Verify backset, PZ spacing, deadbolt throw, faceplate width, and door thickness against existing hardware before ordering.