G-U / Ferco Multipoint Lock Hardware: OEM Replacement Parts
0 subcategories — 115 SKUs
G-U / Ferco multipoint lock hardware covers European-standard mechanisms for hinged entry and patio doors. Stock replacement cylinders, cases, shootbolts, tongues, hooks, rollers, and repair parts across 14 product lines.
Ferco Multipoint Lock Models and Component Compatibility
G-U and Ferco multipoint locks are installed in mid-to-premium residential and commercial hinged doors. Replacement work requires identifying the exact lock case model—Cremona, EUROPA, NEW BREED, SECURY, or Ferco 528/635—then sourcing matching cylinders, latch mechanisms, and hardware. OEM parts ensure proper engagement with existing door frames and keeper plates.
Identify Your Lock Model by Case and Mechanism Type
G-U multipoint locks ship with shootbolts, tongues, hooks, or rollers depending on model. Measure the backset and faceplate dimensions, then cross-reference against your lock case marking (usually stamped on the side). NEW BREED, EUROPA, Cremona, and SECURY lines are not interchangeable. Order the correct subcategory to avoid returns.
Cylinder and Tailpiece Specifications for Ferco and G-U Systems
Cylinders vary by keyway profile and throw length. Most G-U / Ferco locks accept euro-profile cylinders (30/30 or 30/35mm), but Ferco 528/635 and older G-U models use proprietary designs. Confirm your existing cylinder orientation and hole pattern before ordering replacements to ensure proper mechanical linkage to bolt mechanisms.
- →Cylinders, Euro & American profiles
- →Fuhr Multipoint Locks for comparison specs
- →Hoppe Multipoint Lock Hardware alternatives
Volume Ordering and Trade Support for Multipoint Lock Repair
Contractors managing multi-unit renovations or service calls can order full repair kits: cylinders, cases, shootbolts, tongues, rollers, and hardware together. Verify door thickness (35–45mm typical) and installation depth before bulk purchasing to minimize field callbacks.