G-U / Ferco Door Hardware – OEM Replacement Parts & Handles
9 subcategories — 74 SKUs
G-U / Ferco door hardware covers handles, rosettes, lift & slide components, and terrace door systems for European-spec installations. Trade suppliers stock these OEM parts for retrofit and new construction applications across hinged and sliding door assemblies.
Berlin Handle, 65mm Plate
G-U / Ferco Accessories
Cylinder for 1-3/4 or 2-1/4 door, Schlage - Keyed Different - Brass Face
G-U / Ferco 1 x 1-3/8 Cylinder, Schlage, Keyed Different - Satin Chrome
Schlage Cylinder Lock with 3-1/2" Tail
M5 x 40mm Countersunk Screw, Inside Operation
M5 x 60mm Countersunk Screw, Inside and Outside Operation
M5 x 70mm Countersunk Screw
Screw, 2-15/16 inch Steel Screw, Ferco /G-U
M5 x 80mm Screw Inside and Outside Operation Countersunk
Bottom Ring Cap for Berkeley Handle Sets
Lever Handle Only, Left Hand Capri Active - Polished Brass
Lever Handle Only, Right Hand Capri Active - Polished Brass
G-U 3/4" Handle Extender, Old Style, Pre 2012
M5 x 50mm Oval Head Slotted Screw - x .8, 1-3/4 door - Bronze
Trim Plates, 5146 Passive Door with Thumbturn - Dark Bronze
GU Set Screw For Lever Set, M5X6
Dummy Plate Set for Multipoint Lock
G-u Ferco Handle Snap Ring Kit, Standard & Low Profile
Knob Tail Replacement Kit, 48 mm, 3 inch doors
Knob Tail Replacement Kit, 72 mm, 3 inch doors
Actuator Conversion Kit for 2-1/4" Door
Universal Actuator Conversion Kit for 2-3/4" doors - Steel
G-U / Ferco Handle Extensions, Spindles, and Accessories
Square Spindle, 1/4" x 2-3/4 Inch (7mm x 70mm) - Steel
Square Spindle, 1/4" x 4-5/8 inch ( 7mm x 118mm)
Square Spindle, 5-3/16" x 1/4" (7mm x 131mm)
G-U / Ferco 3/4" Handle Extension, New Style Post 2012
G-U / Ferco 3/4" Handle Extension, New Style - Polished Brass
GU Handle Extender - Oil Rubbed Bronze
Construction Key, 7mm, 8mm, 10mm Spindle and key slot tool
G-U 3/4" Handle Extender, Old Style, Pre 2012
Split Shaft Spindle, 5/16" x 4 inch (8mm x 100mm) 1-3/4 Door
Square Spindle, 5/16" x 4-3/8 inch (8mm x 110mm) 2" Door
Replacement Spindle 5/16 x 4-3/4" (8mm x 120mm)
Spindle, 5/16" x 5-1/8" (8mm x 130mm) 3" Door
Split Panic Spindle L145/LA50
Spindle Reducing Sleeve, 8mm
Color Ring, New Trim Line Color Chip Set
G-U / Ferco Lift & Slide and Slide & Fold Parts
G-U Tilt & Turn Lock Case, 50mm backset
G-U 934 Lift Slide Support Guides For Connecting Rod
Dirigent Lift Slide Door Cover
GU Lift Slide Outside Flush Pull
G-U Lockable Gear, 50mm backset slide-fold hardware
G-U Locking Bolts 2/14, for Lift and Slide Hardware
Hinge Cover for Slide and Fold Doors, 25/45 UC5, Bronze
GU Ferco Sliding Door Roller Pair Front and Rear Sliding Door Runners with Rollers
GU Ferco Sliding Patio Door Lift and Slide Front and Rear Rollers For Sliding Doors
G-U Fold & Slide Basic Hardware Set for Sashes Weighing up to 80kg
G-U Fold & Slide Sash Hinge GU-923
GU hardware gasket, P1156
G-U Gripsets for Secury Locks
G-U Handles and Rosettes
G-U/Ferco Outside Rosette - Silver
G-U/Ferco Inside Rosette - Silver
Contemporary Square Angle Handle Double Push-Pull Bar
G-U Allegro Levers, Pair, Oil Rubbed Bronze
G-U Allegro Levers, Pair, Satin Nickel
Regular interior/ Flat exterior Dirigent handle + PC Rosettes
Interior and exterior Regular Dirigent handle + PC Rosettes
G-U / Ferco Belcanto Handle Set for Multipoint Locks
Round Rosettes for Profile cylinder, 1-3/4 or 2-1/4 doors
G-U Sidelite Hardware
G-U Tilt & Turn Lock Case, 50mm backset
Rosette with Thumbturn for Venting Atrium Sidelites
G-U Roller Strike Locking Plate 872
Sidelight Lock Plate, Roller Strike - Unplated Zinc
Sidelight Lock Plate, Roller Strike - Nickel Silver
Atrium 2 roller venting sidelight hardware - 25mm Operable - Brass
3 roller Sidelight Hardware, 25mm Operable, Silver Ferguard
G-U Lockable Gear, 50mm backset slide-fold hardware
G-U Terrace Door Hardware
Roller Version Mortise Lock Gear for 180° Lever, 1-3/8 Backset
ALU-JET insertable gear - 40mm Backset
Roller Version Mortise Lock Gear for 180° Lever, 1-3/4 Backset
Lock with cylinder Bore 1-3/8" (35mm) backset
ALU-JET insertable gear for PC
Terrace Door Mortise Lock with Profile cylinder Bore 1-3/4" (45mm) bs, 7-7/8" (200mm) PZ
Roma Handle, 55mm Plate
G-U / Ferco Hardware Selection by Application
G-U / Ferco hardware integrates multipoint locking, handle actuation, and structural support in European door systems. Technicians specify these components during handle replacement, lock repair, or complete hardware retrofit. Compatibility depends on door type—hinged, lift & slide, or slide & fold—and mounting plate geometry (65mm Berlin, 55mm Roma). Identifying the correct spindle length, plate size, and lock interaction ensures proper operation.
Identify Your Door Type and Plate Configuration
G-U / Ferco hardware splits by door category: hinged doors use standard handles with rosettes; lift & slide doors require integrated handle-latch assemblies; terrace doors need reinforced hardware. Measure your mounting plate (Berlin 65mm or Roma 55mm) and verify spindle compatibility. Handle extensions and spindle adapters bridge non-standard backsets. Select the correct subassembly before ordering to avoid fit issues.
Grip, Spindle, and Accessory Specifications
Gripsets for Secury locks provide ergonomic actuation tied to multipoint firing. Spindles and extensions adjust for thick doors or composite frames. Rosette finishes and backplate options match both traditional and contemporary aesthetics. Cross-reference your lock model (Secury, Cremona, or proprietary G-U variants) to confirm grip and spindle engagement. Oversized or undersized components cause binding or play.
Trade Volume and Technical Support
Contractors and glaziers ordering G-U / Ferco hardware in volume benefit from complete subassembly kits and bulk spindle/extension availability. Technical specs sheet references lock firing sequence, handle throw, and backplate orientation to prevent installation errors. Service documentation clarifies grip-to-lock linkage for retrofit scenarios where original hardware is unknown.